Welcome to the JLG T350 Manual! This guide provides essential information for safe operation, maintenance, and troubleshooting of your machine. It includes detailed instructions, safety precautions, and parts identification for optimal performance and longevity.
1.1 Overview and Purpose
The JLG T350 Manual is a comprehensive guide designed to ensure the safe and effective operation of the JLG T350 boom lift. It provides detailed instructions for operators, technicians, and owners, covering essential aspects such as safety protocols, operational procedures, and maintenance routines. The manual serves as a primary resource for understanding the machine’s capabilities, troubleshooting common issues, and performing routine maintenance to extend its lifespan. By adhering to the guidelines outlined in this manual, users can optimize the performance of the JLG T350 while minimizing risks and ensuring compliance with industry standards. This document is indispensable for anyone involved in the operation or maintenance of the equipment.
1.2 Key Features of the Manual
The JLG T350 Manual offers a wide range of features that make it an invaluable resource for users. It includes detailed system diagrams, troubleshooting flow charts, and step-by-step maintenance instructions. The manual provides a comprehensive parts list with illustrations, enabling easy identification and replacement of components. Additionally, it covers safety guidelines, pre-operation checks, and operational best practices to ensure safe and efficient use of the equipment. The manual is structured logically, with clear sections for easy navigation, making it accessible to both novice and experienced users. These features collectively ensure that the JLG T350 Manual is a thorough and user-friendly guide for anyone working with the T350 boom lift.
Safety Precautions and Guidelines
Always follow safety protocols outlined in the JLG T350 Manual, including load capacity limits, proper harness use, and avoiding unsafe practices like overloading or operating at heights without training.
2.1 General Safety Tips
Adhering to safety guidelines is crucial when operating the JLG T350. Always inspect the machine before use, ensuring all components are functioning properly. Wear personal protective equipment, including a harness and hard hat. Never exceed the load capacity or operate near overhead obstacles. Regularly check tire pressure and brakes to maintain stability. Ensure proper training is completed before operating the lift. Avoid using the machine in extreme weather conditions or uneven terrain without stabilization. Keep the work area clear of obstacles and bystanders. Regularly review the manual to stay updated on safety protocols and maintenance requirements. Following these tips ensures a safer working environment and extends the machine’s lifespan.
2.2 Pre-Operation Checks
Performing pre-operation checks on the JLG T350 is essential for ensuring safe and efficient operation. Begin by inspecting the hydraulic system for leaks or damage. Check the oil and fluid levels, and ensure all hydraulic lines are secure. Examine the tires for proper inflation and look for signs of wear. Test the control panel functions, including boom extension and retraction, to ensure smooth operation. Verify that all safety decals are visible and legible. Inspect the wire ropes and sheaves for wear or damage. Ensure the machine is on level ground and stabilize it if necessary. Check the battery charge and ensure all electrical connections are secure. Document any issues and address them before operation to prevent accidents and maintain optimal performance. Regular checks help identify potential problems early, reducing downtime and extending equipment life.
Operating the JLG T350
Operating the JLG T350 involves starting the engine, using the control panel for boom and platform movement, and ensuring all safety measures are in place during operation.
3.1 Control Panel Explanation
The JLG T350 control panel is designed for intuitive operation. It features joysticks for boom extension and platform rotation, along with buttons for emergency stops and system resets. The panel includes a digital display showing real-time operational data, such as boom angle and platform height. Operators can monitor machine status and adjust settings as needed. Safety switches and alarms are integrated to alert operators of potential issues. Proper familiarization with the control panel is essential for safe and efficient operation, ensuring all functions are used correctly to maintain productivity and safety on the job site.
3.2 Basic Operating Procedures
Before operating the JLG T350, ensure all pre-operation checks are completed. Start by conducting a visual inspection of the machine, checking for damage or wear. Power up the control panel and review the digital display for any system alerts. Once cleared, engage the machine by releasing the parking brake and initiating the hydraulic system. Use the joysticks to control boom extension and platform movement, ensuring smooth and gradual adjustments. Always maintain three points of contact when entering or exiting the platform. In case of emergencies, activate the emergency stop button and follow shutdown procedures. Adhere to load capacity limits and operate within the machine’s designated range for optimal performance and safety.
Maintenance and Repair
Regular maintenance is crucial for the JLG T350. Refer to the troubleshooting manual for diagnosing issues and follow the parts manual for replacement procedures and guidelines.
4.1 Daily Maintenance Tasks
Daily maintenance is essential to ensure the optimal performance and longevity of the JLG T350. Begin by inspecting the hydraulic system for leaks or damage, and check fluid levels. Lubricate all moving parts, such as joints and pivots, to prevent wear and tear. Inspect wire ropes and chains for signs of fraying or damage, and ensure all connections are secure. Additionally, verify that all safety decals are legible and intact. Refer to the JLG T350 manual for specific torque specifications for bolts and nuts, and never reuse old nuts. Finally, clean the machine thoroughly, paying attention to areas around controls and hydraulic components. Regularly following these steps will help maintain safety and efficiency.
4.2 Scheduled Maintenance Intervals
Regular scheduled maintenance is crucial for the longevity and reliability of the JLG T350. Perform hydraulic fluid changes every 500 hours or as specified in the manual. Inspect and replace wire ropes every 12 months or sooner if signs of wear appear. Lubricate all pivot points and moving components every 50 hours of operation. Additionally, check the battery terminals and electrolyte levels monthly to ensure proper electrical function. Annual inspections should include verifying the integrity of hydraulic hoses and connections. Always refer to the JLG T350 manual for specific maintenance schedules and procedures. Adhering to these intervals will help prevent unexpected breakdowns and ensure safe operation. Regular maintenance also contributes to maintaining the machine’s performance and extending its service life.
Troubleshooting Common Issues
Identify and resolve common issues with the JLG T350 using the troubleshooting manual. Address hydraulic system malfunctions, error codes, and operational delays. Refer to system diagrams and diagnostic techniques for quick solutions.
5.1 Identifying Common Problems
Common issues with the JLG T350 include hydraulic system malfunctions, jib down valve shorts, and over-run hitch delays. Consult the troubleshooting manual for detailed diagnostic techniques. System diagrams and error codes help pinpoint problems quickly. Regular inspection of hydraulic lines, valves, and electrical connections can prevent unexpected downtime. Look for symptoms like slow operation, unusual noises, or error messages. Address issues promptly to maintain safety and efficiency. Always refer to the official JLG T350 manual for specific repair instructions and guidelines. If problems persist, contact authorized JLG service professionals for assistance. Proper troubleshooting ensures optimal performance and extends the lifespan of your equipment. Stay proactive with routine checks and timely repairs.
5.2 Diagnostic Techniques
Diagnosing issues with the JLG T350 involves systematic checks using system diagrams and troubleshooting flow charts. Start by identifying error codes or symptoms, such as slow operation or valve malfunctions. Inspect hydraulic lines, electrical connections, and fluid levels. For example, the over-run hitch must be checked if it takes longer than 30 seconds to return. Use the manual’s detailed instructions to test components like the jib down valve or hydraulic pumps. Visual inspections and functional tests are crucial for pinpointing faults. Always follow safety guidelines and consult the official JLG T350 troubleshooting manual for step-by-step solutions. If issues persist, contact authorized JLG service professionals for expert assistance.
Parts and Accessories
This section provides a comprehensive guide to identifying and ordering parts for the JLG T350. Use the illustrated parts manual to locate components and order replacements through authorized dealers or online platforms like skytrak.com.
6.1 Identifying Parts
Identifying parts for the JLG T350 is streamlined with the illustrated parts manual, which includes 32 detailed sections. Each section features diagrams and figures showcasing the assembly and installation of components. Users can easily locate specific parts by referencing the clear visual guides and corresponding part numbers. This manual ensures accurate identification, preventing errors during maintenance or repairs. Additionally, it provides instructions for ordering replacement parts through authorized dealers or platforms like skytrak.com. Always cross-reference part numbers with the official JLG database to ensure compatibility and authenticity. This section is essential for operators and technicians to efficiently manage and maintain their equipment.
6.2 Ordering Replacement Parts
Ordering replacement parts for the JLG T350 is a straightforward process using the illustrated parts manual. Users can directly reference part numbers from the manual to ensure accuracy. Replacement parts can be purchased through the JLG Online Express store, SkyTrak, or authorized dealers. The official JLG website provides a parts lookup tool to verify compatibility. When ordering, ensure to use the exact part numbers from the manual to avoid errors. Always purchase from verified sources to guarantee authenticity and safety. This streamlined process ensures quick access to genuine parts, minimizing downtime and maintaining equipment performance. Proper documentation and record-keeping are recommended for future reference and warranty claims.
Technical Specifications
The JLG T350 manual details performance specifications, including lift capacity, maximum platform height, and hydraulic system overview. It provides essential technical data for optimal machine operation and maintenance.
7.1 Performance Specifications
The JLG T350 manual outlines key performance metrics, ensuring operators understand the machine’s capabilities. It covers maximum platform height, lift capacity, and operational speeds, crucial for safe and efficient use. The manual also details the machine’s weight distribution and stability parameters, ensuring optimal performance under various conditions. Additionally, it provides specifications for the hydraulic system, including pressure settings and fluid requirements, which are vital for maintaining proper functionality. These details help operators make informed decisions, ensuring the T350 is used within its design limits for reliability and longevity. Proper adherence to these specifications enhances both safety and productivity in diverse work environments. Always refer to the manual for precise technical data to ensure optimal machine performance and compliance with safety standards.
7.2 Hydraulic System Overview
The JLG T350 manual provides a detailed overview of the hydraulic system, highlighting its role in powering the machine’s movements and operations. The system includes pumps, valves, cylinders, and fluid reservoirs, all working together to ensure smooth and precise control. Regular maintenance, such as fluid level checks and filter replacements, is emphasized to prevent system failure. Proper hydraulic system care is critical for extending the machine’s lifespan and maintaining optimal performance. The manual also outlines pressure settings and diagnostic procedures for identifying potential issues. Understanding and adhering to these guidelines ensures safe and efficient operation of the T350. Always follow the recommended hydraulic system procedures to maintain reliability and avoid costly repairs.
The JLG T350 Manual serves as a comprehensive guide for safe and efficient operation. By adhering to its instructions, users can ensure optimal performance, longevity, and safety. Proper maintenance, adherence to safety protocols, and regular inspections are crucial for maximizing the machine’s potential. Always refer to the manual for troubleshooting and maintenance procedures. Following these guidelines will help users achieve their operational goals while minimizing risks and extending the lifespan of the equipment. The manual is an indispensable resource for anyone working with the T350, providing clear and detailed information to support its effective use.
8.1 Summary of Key Points
The JLG T350 Manual is a comprehensive guide designed to ensure safe and efficient operation of the equipment. It covers essential topics such as safety precautions, operational procedures, maintenance tasks, and troubleshooting techniques. The manual emphasizes the importance of adhering to safety protocols to prevent accidents and extend the machine’s lifespan. Detailed instructions are provided for daily inspections, scheduled maintenance, and parts replacement, ensuring users can identify and address issues promptly. The inclusion of diagrams, flow charts, and technical specifications makes it easier to understand complex systems. By following the manual’s guidelines, operators can optimize performance, reduce downtime, and maintain compliance with industry standards. This resource is indispensable for anyone working with the T350, offering clear, actionable advice for every aspect of its use and care.
8.2 Importance of Proper Usage
Proper usage of the JLG T350 is critical for ensuring safety, efficiency, and longevity of the equipment. Adhering to the guidelines in the manual helps prevent accidents, reduces wear and tear, and maintains optimal performance. Operators must follow safety protocols, conduct regular inspections, and perform scheduled maintenance to uphold the machine’s integrity. Proper usage also ensures compliance with industry standards and manufacturer recommendations, safeguarding the operator and others on site. By prioritizing correct operational practices, users can maximize productivity while minimizing risks and downtime. The JLG T350 Manual serves as a vital resource to guide operators in achieving these goals effectively.